Cox .049 Baby Bee

Cox model engines  were in production for more than 50 years between 1945 and 2006 by L.M. Cox Manufacturing Co. Inc. who later became "Cox Hobbies Inc." and then "Cox Products" before being sold to Estes Industries when it became Cox Models. On February 7, 2009 Estes Industries stopped producing Cox engines.

Millions of engines were produced and they became the most common 1/2A Class  0.049 cubic inch engine in the world and probably still are today. Although the production of the engines ceased some years ago now, engines made as far back as the 1950s are still sold "as new" and in abundance world wide.

Cox developed the Babe Bee 049 in 1956, it was designed by William (Bill) Selzer, and featured an extruded aluminum crankcase, not cast like all the others, this engine sold for just $3.95 and stamped the final nail in the coffin of many competitors whose engines were selling for substantially more. The Babe Bee was a high quality high precision engine which started easily and was very reliable, unlike some of the competition.

The 1956 Babe Bee 049 (Cat#350 - Manufactured Nov 1956-Jan 1996) is commonly referred to as the classic Babe Bee, it was the first engine Cox produced with an extruded machined anodized bar stock aluminum crankcase. This crankcase was machine made and was much cheaper and faster to make than the cast aluminum crankcase of the earlier models. This engine was also supplied in thousands of RTF (Ready to Fly) airplanes sold in department stores worldwide. It has an integrated 5cc fuel tank. Max output power was recorded around 0.057 bhp (42 watts) @ 13,500 rpm on 15% nitro.

Specifications:-


Displacement  0.049 Cubic Inches (0.803 cm³)


Cylinder and Porting

                   Exhausts  Bypass   Ports  Bypass    Boosters           SPI          Tapered Grind     No. Stamp on cyl

Babe Bee

Open

1

0

Yes

No

2

Design Development History:-

The early engines that were produced before 1957 had a light alloy piston rod which is retained in its socket by a slotted steel retaining cup which in turn is held in place by a steel circlip located in a shallow groove in the interior piston wall. This arrangement (known as a three piece piston) was abandoned as of 1957 in favour of a hardened steel rod which was swaged into a bearing cup formed integrally in the piston interior. The advantage of this latter set-up was that it simplified assembly and the bearing could be re-set to take up play using a suitable "reset" tool to re-swage the cup. The Bee engines had 2 types of crankshaft produced. and they are both interchangeable.


Variant Model Features:-

1. All Bees with the exception of the Killer Bee and Venom had the same crankshaft that was only good for about 20,000 rpm before theconrod pin would break off;
2.  Early engines—Space Bug, Thermal Hopper, Strato Bug—circular twin copper reeds:
3. Bee Engines—star shaped single beryllium copper reed held in place by a circlip reed retainer;
4. Later Bees, Killer Bees, Venom—oval shaped stainless steel reed which is held in place by a plastic reed retainer;
5. Later variants of the star and oval reeds were made of Mylar and Teflon. Some say Mylar is the best while others prefer the stainless steel and then others prefer the Teflon. Claims are that Mylar and Teflon are lighter and make the engine easier to start and go faster, but they do not last as long as the stainless ones.

After Market Throttle

Muffler

Click on the object below to see a short video clip of the RC modified version of the Sure Start version of the Baby Bee starting and running on low nitro fuel with a rich NV setting.

Do you have a video clip that you are willing to share; a vintage engine to trade or want to purchase one of our vintage runners?
If the answer is yes, go to our trading post for a visit and have a look around.
To go to the Trading Post site right click on this LINK it will open in a new window.

STAB Ignition Engine

STAB Ignition Engines were produced in various displacements from 1.25 to 10 CC's. While the manufacturing quality was excellent the compression ratio was far too low for it to be used in high performance applications such as powering model aircraft. Consequently the company's greatest success with their STAB engines was attained when they were used as a marine engine and fitted with a water cooling jacket.


Production of the line ceased in the late 1950's although the company in still in business they no longer produce these model engines.


For more information on the complete line of STAB engines, go to This collectors page


The feature Engine of this page was designed and manufactured in France Circa 1940's. 


Specifications:-


Type 2 Stroke Gas Ignition;
Displacement Capacity 10 cc

To view a short clip of the starting and running of this fine old engine click on the object below.

MICRON 60 (10 CC)

This was the complete line of Micro engines at the time of their demise in 1979.

 The Micron brand had been in production since the mid 1940's in France by Andre Gladieux, 8 Rue Victor Gelez, Paris XI.

The 10CC/.60CI Micron 4 cylinder made in France in the 70's. This beauty was very expensive even in it's day. The 60 was actually a double twin with 4, 2.5 CC cylinders.

The Micron 4 cylinder 


Specifications:-


Displacement !0CC/0.60CI
Engine Type   2 Stroke, Glow
Engine Design  Double Twin
Speed Range 3,000 - 15,000 RPM
Maximum Power  0.90 @ 14,000 HP  


To View a short video clip demonstrating the starting and running this vintage classic just click on the object below.











FOUR cylinder 2 stroke double twin model engine RC

"

'via Blog this'